Price Match Pledge - We won't be beaten on price
Product ID: GSMSK
This PC programming software kit includes CD, manual and micro USB lead for use with the Videx GSM ranges.
The software is compatible with 2G, 3G and 4G network versions. The connection to the GSM intercom or module and the PC can be made via the micro USB cable connection between the two units.
£33.99
To receive our best prices on thousands of automation, access control and safety products.
The GSMSK allows a user to programme the features of the GSM such as call button or apartment telephone numbers including divert numbers, additional features and settings relevant to the particular GSM system. Before using the PC software the GSM system being programmed MUST first be installed (a registered SIM fitted, GSM antenna connected, 12Vdc power connected and the GSM intercom powered up and initialised.
• Check and update the GSM’s signal strength and bit error rate (BER);
• Check the GSM’s current firmware;
• Check the current balance of the SIM (for pay as you go SIM’s only that have been setup correctly);
• Set and check the time and date with the PC;
• Download, display and then save an event log;
• Open a previously saved event log;
• Search for a specific event or events;
• Print an event log;
• Upload/download and edit a company logo (available for the digital GSM only);
• Import and export programmed numbers (calls), dial to open numbers (DTO), proximity fob/cards from and to Excel files;
• Import an old .dat file (containing programming settings, call setup etc. from previous GSM intercom models);
• Print a copy of the GSM settings, call button setup, dial to open (DTO) setup and programmed proximity fob/card numbers.
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
