Price Match Pledge - We won't be beaten on price
Product ID: RB1000
A quiet and reliable sliding gate kit that is easy to install
The Robus 1000 is suitable for large residential gates and small commercial gates
It is adaptable to climatic conditions and has adjustable acceleration and deceleration at opening and closing.
£658.63
To receive our best prices on thousands of automation, access control and safety products.
User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven pairs of photocells from the MoonBus series using two wires only.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB1000 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast aluminium and epoxy paint finish.
Very quiet: gear motor on bearings.
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
