Price Match Pledge - We won't be beaten on price
Product ID: MYGO2
The 2 button MyGO transmitter comes with radio frequency 433.92 MHz with Unidirectional O-Code coding. The new 2024 slim, sleek multiple button range.
£32.96
To receive our best prices on thousands of automation, access control and safety products.
The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver.
MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems.
Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs.
By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 2 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence
TECHNICAL SPECIFICATIONS
Product type Unidirectional transmitter
Power supply 3 Vdc lithium battery type CR2430
Battery life approx. 3 years, with 10 command transmissions per day
Frequency 433.92 MHz
Radiated power (ERP) < 10 mW
Radio encoding O-Code ET Blue, Peccinin and Linear
Operating temperature -5°C ... +55 °C
Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover)
Dimensions 72 x 34 x 110h mm
Weight 20 g
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
