Catalogues & Manuals

Trade Log in / Sign Up
IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED
Rated 4.7/5 on Google from 250+ reviews
Free UK Technical Help & Support

Price Match Pledge - We won't be beaten on price

AES EL00C E-loop commercial loop only for exit mode
AES EL00C E-loop commercial loop only for exit mode - Image 2
AES EL00C E-loop commercial loop only for exit mode - Image 3
AES EL00C E-loop commercial loop only for exit mode - Image 4
AES EL00C E-loop commercial loop only for exit mode - Image 5
AES

AES EL00C E-loop commercial loop only for exit mode

Product ID: EL00C

The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles, up to 50m range and 10,000kg static load limit.

Designed to be bolted to the ground surface for commercial use, with no need for extensive groundworks, saving time and cost. 

View more

£365.00

+ Add to FavouritesAlready added to List
+ Add to Favourites

Become a Trade Customer

To receive our best prices on thousands of automation, access control and safety products.

Register Now

Additional Information

All Eloop range require a 12V-1A-PSU for power supply, can not be wired direct to the gate automation control panel for power.

These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode.

The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.

Note: Gate or door controller must have a dedicated open input and auto close function enabled

Quick and easy installation.

  • Compact profile – only 26mm high x 200mm diameter.
  • Not affected by ground movement.
  • 10600 mA battery giving up to 10 years battery life
  • High security 128 bit encryption.
  • Static load capacity 2500kg.
  • Range up to 50 meters.
  • Made of high impact plastic

Installation in 3 simple steps

1 – Code in e-Loop.
2 – Secure e-Loop to the driveway.
3 – Calibrate e-Loop and you’re ready to operate in less than 15 minutes. Save many hours of installation time compared to wired loop systems.

Specification Imagery

Manuals

EL00C Commercial exit mode datasheetEL00c commercial fixing instructions

Optional Accessories

About Us

Information

Shop

Contact Us

Follow Us

Facebook Twitter Linkedin Instagram

Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE

© 2025 Rolling Center Ltd. All Rights Reserved

WARNING!

The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453

If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.