Price Match Pledge - We won't be beaten on price
Product ID: 2505
IPure system IP remote relay & CloudBox module, the 2505, for communication via a Local Area Network (LAN). Using cloud services, communication across the internet can also be achieved with the use of tablets or smartphones running the Videx CloudNected App.
The 2505 has two built-in relays and two active low inputs plus a serial RS-485 bus connection for interfacing with other automation devices. Although it can be powered by 12Vdc it includes an RJ45 ethernet connection with PoE feature, allowing it to be powered without the need for a power supply.
In addition to the device being setup as a general purpose I/O device which can be controlled by apartment devices and the CloudNected App, the relays can be setup to operate door locks or electric gates remotely and securely when setup in “replication” mode (Secured by Design). Alternatively the relays can be setup in “repeater” mode to operate an additional sounder and/or strobe unit.
It also includes “CloudBox” mode allowing the user to use the Videx CloudNected mobile App without the need for an IP videophone.
£132.87
To receive our best prices on thousands of automation, access control and safety products.
Main Features:
• 12Vdc power supply or PoE.
• 10/100 Mbit Ethernet interface.
• Two dry contact (C,NC,NO) relays operating as standard, latch or pulse (toggle) mode.
• 2 active low programmable inputs (IN1/IN2).
• Serial RS-485 bus for home automation devices.
• VIDEX MAC addresses.
• Connection via LAN, WAN or private network.
• RJ45 ethernet connection.
• VIDEX Cloudnected mobile App available for tablets and smartphones (Android & iOS).
• Two direct relay activation buttons (P1/P2).
• Boot loader mode (for firmware update recovery purposes).
• “Replication” mode for secure door activation.
• “Repeater” mode for sounders and/or strobes.
• “CloudBox” operating mode.
• Lift control operating mode.*
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
