Price Match Pledge - We won't be beaten on price
Product ID: 2204N/B
The 2204N/B is a boxed version of the 2204N, and will protect against shorts or faults on all connections to an apartment. Plug in connections are used for easy maintenance.
£117.94
To receive our best prices on thousands of automation, access control and safety products.
In standby mode the phones connected to the 2204N are disconnected from the main BUS. During a call the selected output on the card will be connected to the main BUS, the green LED next to the output will illuminate for the length of the call.
There are 10 status LED’s on each card. The green LED next to each output is used to identify when an output is in use (green output LED indicates that the output is ON). The red LED next to each output indicates when there is a fault on the bus connection of that output. Next to the main input of the card is a red 12V fault LED, which will indicate if there is a fault on the 12Vdc input and also a yellow S1 active LED to indicate when the S1 terminal connection is active.
Audio cabinets with isolation (2291A4, 2291A8 and 2291A12) will include 1, 2 or 3 2204N 4 way isolation cards depending on which cabinet is being used
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
