Price Match Pledge - We won't be beaten on price
Product ID: RUNKIT400HS
THIS KIT DOES NOT INCLUDE DRIVE RACK
MAX GATE WEIGHT 400KG – 0.67 M/S
1 x RUN400 HS 24V Motor
2 x ON2E Channel Transmitters
1 x OXI 4 Channel Receiver
1 x Pair of MOFB Photocells
£1,154.48
To receive our best prices on thousands of automation, access control and safety products.
User-friendly: the BlueBUS technology, enables to power and control a maximum of 7 couples of photocells from the MoonBus series using two wires only.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced: the temperature sensor adapts the motor force to weather conditions, setting the thermal cut-out protection accordingly; a master/slave selection automatically synchronises 2 motors, enabling the automation of sliding gates with two opposing leaves.
Intelligent: thanks to the obstacle detection systemcand automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
Sturdy: aluminium release handle for easy opening.
Very quiet: gear motor on bearings.
HS 24V Motor
Channel Transmitters
4 Channel Receiver
MOFB Photocells
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
