Price Match Pledge - We won't be beaten on price
Product ID: STOPPYMBB500KIT
Designed for commercial installations to control access and provide security to property and buildings, the BFT Stoppy MBB 500 Kit is a simple, ready to install and value for money automatic rising bollard kit with LED Light Crown.
Options for controlling the barriers are:
£3,640.00
To receive our best prices on thousands of automation, access control and safety products.
Complete range of automatic electromechanical retractable bollards for the protection and safety of all areas that require controlled access.
Rod height 500 and 700mm. Ideal for contexts of particular architectural interest, guaranteeing maximum reliability over time and requiring minimal maintenance.
Electromechanical bollard complete with form, with shaft height 500 mm and diameter 220 mm. Impact resistance 10500 J.
The option of supply as an integrated unit or with outer casing separate from the operator allows the installer to complete digging and preparation for installation ahead of time.
The new square flange allows for perfect architectonic integration and hence better insertion into the full range of urban contexts.
The conical stem cap and EPDM flange gasket provide highly effective protection against foreign matter entering between the stem and the outer casing, thus making the unit maintenance free.
| Control unit | PERSEO CBE 230.P SD |
| Power supply | 230 V |
| Power input | 300 W |
| Opening or closing time | 9 s |
| Rod height | 500 mm |
| Rod diameter | 220 mm |
| Type of limit switch | REED magnetic sensor |
| Slowdown | Yes |
| Impact resistance | 10500 J |
| Break-in proof | 150000 J |
| Manual cycle | reversible in the absence of voltage |
| Frequency of use | very intensive |
| Protection rating | IP67 |
| Environmental conditions | -15 ÷ 60 °C |
| U-Link | no |
Imperial measurements
The data shown are for information purposes only.
| Control unit | PERSEO CBE 230.P SD |
| Power supply | 230 V |
| Power input | 300 W |
| Opening or closing time | 9 s |
| Rod height | 19.68505 inch |
| Rod diameter | 8.661422 inch |
| Type of limit switch | REED magnetic sensor |
| Slowdown | Yes |
| Impact resistance | 10500 J |
| Break-in proof | 150000 J |
| Manual cycle | reversible in the absence of voltage |
| Frequency of use | very intensive |
| Protection rating | IP67 |
| Environmental conditions | 5 ÷ 140 °F |
| U-Link | no |
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
