Price Match Pledge - We won't be beaten on price
Product ID: HAY-PSUMULTI-5A
New Haydon Multi range power supply 5A with 9 outputs and out reset PTC fuse.
The clear panel in the front of each unit allows engineers to see if outputs are live without opening.
£32.00
To receive our best prices on thousands of automation, access control and safety products.
When traditional fuses are being used for overcurrent protection, they can only protect once, and then it must be replaced. The PTC resettable fuse is a type of overcurrent protection element that has two functions: overcurrent protection and automatic reset.
• The overcurrent protection PTC element is serially connected to the circuit and under normal circumstances, it provides a low resistance state and can ensure the normal working of the circuit. If a short circuit or unusually high current occurs, the PTC fuses cut in to reduce the voltage to a trickle, thus preventing damage and protecting the equipment.
• The PTC fuse will automatically reset once the fault in the overcurrent is removed. The PTC elements will automatically return to their low resistance state, which not only avoids maintenance or replacement but also avoids a continuously circulating switching state that can cause circuit damage.
The MULTI-5A has 9 total outputs.
Outputs: 1 to 4 the fuses are rated to 1.6A
Outputs: 5 to 9 the fuses are rated to 1.1A.
Maximum Output cannot exceed 5A
Input Voltage : AC 110 – 240V Rated 3amp main fuse
Storage Temperature : - 20 to 85C
Operating Temperature : -10 to 50C
Operating Relative Humidity : 0-90%
Dimensions : 18 x 16.5 x 5.2 cm
Weight : 1Kg
Rolling Center Ltd, Unit 6, Whitehall Cross, Leeds, LS12 5XE
© 2025 Rolling Center Ltd. All Rights Reserved
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.
